[Trace-users] Ventilation Rate
LWilson at integral-group.net
Mon Apr 5 13:14:21 PDT 2010
Thank you for your response Caleb.
Yes I am using templates, but since the system types are different for my proposed and my baseline, my system level ventilation rates are different as well.
From: Caleb Bulow [mailto:cbulow at prengr.net]
Sent: Monday, April 05, 2010 4:12 PM
To: Wilson, Luke; trace-users at lists.onebuilding.org
Subject: RE: [Trace-users] Ventilation Rate
Are you using the templates?
PRAIRIE ENGINEERING, P.C.
From: trace-users-bounces at lists.onebuilding.org [mailto:trace-users-bounces at lists.onebuilding.org] On Behalf Of Wilson, Luke
Sent: Monday, April 05, 2010 3:03 PM
To: trace-users at lists.onebuilding.org
Subject: [Trace-users] Ventilation Rate
For ASHRAE 90.1 Appendix G, it requires that the proposed and baseline ventilation rates be the same. I have my proposed ventilation rate. Is there a way to input a system level Ventilation rate in Trace?
Any help would be appreciated.
* Please note our new contact information and operating entity *
Luke Wilson, EIT, LEED AP BD+C
3005 Carrington Mill Blvd., Suite 550, Morrisville, NC 27560
t: 919.597.7931 f: 919.433.5301 e: lwilson at integral-group.net<mailto:lwilson at integral-group.net> www.integral-group.net<http://www.integral-group.net/>
Integral Group. Deep green engineering.
This email and any files transmitted with it are confidential and intended solely for the addressee. If you are not the named addressee you should not disseminate, distribute, copy, or alter this email.
Please consider the environment before printing this email.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Trace-users