[Trace-users] Campus Steam to Hot Water Heat Exchanger
cbulow at prengr.net
Fri Sep 10 13:48:22 PDT 2010
If you are using the latest Trace 700, look under
Help->Documentation->Users Manual. This will pull up a PDF; jump to
page 84 and they have a step-by-step how-to on modeling purchased steam.
If you don't have the PDF, I can email. It is a handy manual showing
how to model many types of plants.
PRAIRIE ENGINEERING, P.C.
From: trace-users-bounces at lists.onebuilding.org
[mailto:trace-users-bounces at lists.onebuilding.org] On Behalf Of Snarski,
Sent: Friday, September 10, 2010 3:36 PM
To: trace-users at lists.onebuilding.org
Subject: [Trace-users] Campus Steam to Hot Water Heat Exchanger
I'm working on an Energy Model and I got to the Supply Temperature Reset
portion of Appendix G, and came up with a question:
The building is on a Campus Steam loop, that is fed into a heat
exchanger that then provides Hot Water to the building. Now, I
currently have "Purchased Steam" for the heating plant, and this will be
used for the baseline as well, as per our new LEED Treatment of District
Energy document friend.
Does anyone have any idea on how to simulate this in TRACE?
Martin Snarski LEED(r) AP BD+C
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Trace-users