[TRNSYS-users] Flowrate Control

David BRADLEY d.bradley at tess-inc.com
Mon Jul 1 08:10:59 PDT 2013


Amani,
   It should be possible to use the PID controller to obtain the outlet 
temperature that you want but without having your project, it isn't 
possible to know what is incorrect. This is the kind of question you 
should address to your distributor.

   As a side note, if you have access to the TESS HVAC library, there 
are a number of heat exchanger models in that library that are set up to 
allow control based on outlet temperature of either the hot or the cold 
side.
Kind regards,
  David


On 6/28/2013 04:41, Amani ZRIBA wrote:
> Dear TRNSYS users,
>
> In my model ( a solar wood dryer) , i have a diverter connected to a 
> heat exchanger water/air.
>
> I want to control the flowrate at outlet 1 of the diverter to maintain 
> the heat exchanger cold-side temperature at a desired value. I tried 
> with the PID controller but the problem lies in the components 
> connections.
>
> Please help me through this problem.
>
> Best regards.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130701/5b70380a/attachment-0001.htm>


More information about the TRNSYS-users mailing list