[TRNSYS-users] Restaurant absorp. cooling Tess example

Martin Berov martber88 at gmail.com
Fri Apr 25 02:17:09 PDT 2014


Thank you, I found the weather block it was in the hidden layer.
I have one more issue, as I understand the absorption chiller always
modulate its power so it can reach the chilled water set point temperature?
- so does it mean that with this type 107 it is not possible to make
simulations with different chiller powers(rated capacity) and see how they
affect on the system?

Kind regards
Martin




On Fri, Apr 25, 2014 at 2:48 AM, Jeremy Osborne <
jeremy.osborne at solem-consulting.com> wrote:

> Hi Martin,
>
>
>
> The weather data is hidden in a layer. Go to view -> show layers -> and
> enable weather - data files and you should see TYPE15-2 appear with all the
> connection.
>
>
>
> Layers are used to better organise complex models, removing certain
> clutter.
>
>
>
> Regards,
> Jeremy
>
>
>
> *SOLEM Consulting Pty Ltd*
>
> Jeremy Osborne | Project Engineer BE
>
> 525 Harris St | SYDNEY NSW 2007| Australia
>
> P:  +61 2 8006 7355
>
> M: +61 421 914 516
>
> E: jeremy.osborne at solem-consulting.com
>
> W: www.solem-consulting.com
>
> Follow our useful updates: linkedin.com/company/solem-consulting<http://www.linkedin.com/company/solem-consulting>
>
>
>
> Please consider the environment before printing this email
>
>
>
> PLEASE NOTE
>
>
>
> The information contained in this e-mail may be confidential or
> privileged. Any unauthorised use or disclosure is prohibited. If you have
> received this e-mail in error, please delete it immediately and notify the
> sender by return email. Thank you. To the extent permitted by law, Solem
> Consulting does not represent, warrant and/or guarantee the integrity of
> this communication has been maintained nor the communication is free of
> error, virus, interception or interference.
>
>
>
>
>
> *From:* Martin Berov [mailto:martber88 at gmail.com]
> *Sent:* Thursday, 24 April 2014 8:02 PM
> *To:* trnsys-users at cae.wisc.edu
> *Subject:* [TRNSYS-users] Restaurant absorp. cooling Tess example
>
>
>
> Hi,
>
>
>
> I was looking at the example provided  with the Tess library about the
> Restaurant absorption chilling, so the simulation runs ok, but I can not
> find the weather block i.e. the collector and building are not connected to
> it -how is this possible, how does it function, can someone give me
> explanation?
>
>
>
> Thank you
>
>
>
> Best Regards
>
> Martin
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140425/c8305403/attachment-0001.htm>


More information about the TRNSYS-users mailing list