[TRNSYS-users] How to simulate the heating demand of a village or a neighborhood?

Mateo de Guadalfajara mateog at unizar.es
Wed Feb 12 07:07:21 PST 2014


I missed the link for the master thesis and some people is asking for it
Follow this link. http://zaguan.unizar.es/record/10314/




2014-02-12 15:17 GMT+01:00 Mateo de Guadalfajara <mateog at unizar.es>:

> Dear Jordi Jové
>
> I have been in the same point as you are right now.
>
> TRNSYS is not easy to use at the beginning but it is a very useful tool.
> I reccomend you to do some tutorials (you can find them online) to start.
>
> After, you can do your first models from available models that already
> exist, that makes things easier.
> Following this link you can read my Master Thesis "Evaluation of Central
> Solar Heating Plants with Seasonal Storage for the residential sector in
> Spain".
> In Annex B you will find a complete description of a TRNSYS model,
> including a TRNBuild simulation to have a dynamic thermal energy demand.
> The document is in Spanish, if you are not spanish speaker I will try to
> find an English version.
>
> Regards,
>              Mateo de Guadalfajara
>
> -------------------------------------------------------------
> Mateo de Guadalfajara
> Universidad de Zaragoza
> Dept. of Mechanical Engineering
> Group of Thermal Engineering and Energy Systems (GITSE) - Aragon Institute
> of Engineering Research (I3A)  http://i3a.unizar.es/
>
> Escuela de Ingeniería y Arquitectura (Ed. Betancourt)
> C/ María de Luna, 3
> 50018 - Zaragoza - Spain
> e-mail: mateog at unizar.es <serra at unizar.es>
> ---------------------------------------------------------------
>
>
>
> 2014-02-12 13:54 GMT+01:00 J Jove <jovejm at gmail.com>:
>
>> Hi,
>>
>> I am a noob working on Trnsys 16. I am doing a district heating
>> simulation where the heat is supplied by burnt gases.
>>
>> I placed a "auxiliar heater type659" to water warming and a "forcing
>> function type14h" to set the period. This heat is stored for the demand.
>>
>>
>> I know the total value for the heating demand, but I don´t know how to
>> simulate this demand with different values for each day. Should I create a
>> "multi-zone-building? and then?
>>
>> Sorry, but I couldn't find more info.
>>
>> Thanks
>> ---
>> Jordi Jové
>> *jovejm at gmail.com <jovejm at gmail.com>*
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140212/3cc9ba35/attachment-0001.htm>


More information about the TRNSYS-users mailing list