[TRNSYS-users] The Front convective Heat Transfer Coefficient of Wall in TYPE 56

JUAN FRANCISCO BELMONTE TOLEDO JuanF.Belmonte at uclm.es
Fri Jan 24 01:15:20 PST 2014


Hello Yasmina.

 

I think it can be interesting in case you choose the “internal calculation” option in TRNBUILD for the heat transfer coefficient, and you want to know its value. Otherwise the output value must be the same that you entered as an input value.

 

Juan Francisco Belmonte Toledo

Dpto. de Mecánica Aplicada e Ing. de Proyectos

Universidad de Castilla-La Mancha

Juanf.belmonte at uclm.es

---------------------------------------------------------------------------------

Escuela de Ingenieros Industriales

Campus Universitario s/n, 02071, Albacete

---------------------------------------------------------------------------------

Instituto de Investigación en Energías Renovables

Sección de Eficiencia Energética y Sistemas Térmicos (ENERSYS)

C/ de la Investigación, s/n, 02071, Albacete

---------------------------------------------------------------------------------

 

 

De: trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] En nombre de yasmina.el-hasnaoui at cofelyaxima-gdfsuez.com
Enviado el: viernes, 24 de enero de 2014 10:03 a.m.
Para: trnsys-users at cae.wisc.edu
Asunto: Re: [TRNSYS-users] The Front convective Heat Transfer Coefficient of Wall in TYPE 56

 

Dear Mika, 

 

Thank you for you quick answer. 

 

On the TRNSYS manual (chapter 5 –MultizoneBuilding page 5-34) , it’s written that the HCONVI unit is [kJ/hm2K]. I am not sure it’s  a heat transfer rate from the selected surface.

 

Yasmina EL HASNAOUI
Ingénieure Calculs
Pôle Process Industriel
Semicad

 
123 avenue Barthélémy Buyer
69005 Lyon – France

Tel  : +33 (0) 426 10 66 94
yasmina.el-hasnaoui at cofelyaxima-gdfsuez.com

Cofely Axima et OMEGA Concept, des marques de la société AXIMA Concept
www.omega-concept-gdfsuez.com 
P Pensez à l’environnement avant d’imprimer ce message. 

 

De : trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] De la part de ?? ??
Envoyé : Freed 24 jannewaris 2014 9:42
À : TRNSYS users mailing list at the Solar Energy Lab, UW-Madison
Objet : Re: [TRNSYS-users] The Front convective Heat Transfer Coefficient of Wall in TYPE 56

 

Dear Yasumina,

 

I think HCONVI is not a heat transfer coefficient [kJ/hm2K] but a heat transfer rate [kJ/h] from the selected surfce.

 

Best regards,

Mika

 

==================

Mika Yoshinaga

Associate Prof. 

Meijo University, Japan

yoshi at meijo-u.ac.jp

==================

 

2014/1/24 <yasmina.el-hasnaoui at cofelyaxima-gdfsuez.com>

Dear TRNSYS users, 

 

Does anybody know what is the difference between the front convective Heat Transfer Coefficient that you enter in type 56 and the type 56’s output called NType 108 : HCONVI ( eff.inside cinv. Heat transfer coeff (FRONT) ) ?

 

Kind regards,

 

Yasmina EL HASNAOUI
Ingénieure Calculs
Pôle Process Industriel
Semicad


123 avenue Barthélémy Buyer
69005 Lyon – France

Tel  : +33 (0) 426 10 66 94 <tel:%2B33%20%280%29%20426%2010%2066%2094> 
yasmina.el-hasnaoui at cofelyaxima-gdfsuez.com

Cofely Axima et OMEGA Concept, des marques de la société AXIMA Concept
www.omega-concept-gdfsuez.com 
P Pensez à l’environnement avant d’imprimer ce message. 

 


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140124/7dd369a0/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 19321 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140124/7dd369a0/attachment-0001.jpeg>


More information about the TRNSYS-users mailing list