[TRNSYS-users] TRNSYS 17- Range check error after saving building project

Philip philiphorn at gmx.de
Wed May 21 06:27:45 PDT 2014


Dear David,

Thank you very much for your answer.

I already found almost the same answer from several years ago and thus 
did everything you recommended (despite contacting my distributor) 
without any success.

/I was hoping that it is something like an easy-to-fix known 
compatibility issue, but it seems to be more difficult.

Best,
Philip


/
On 5/20/2014 6:39 PM, David BRADLEY wrote:
> Philip,
>   A range check error is a very generic Fortran message for an error 
> that wasn't cleanly caught in the code. For example if the argument to 
> a LOG() function is not checked to make sure that it is positive then 
> you might get a range check error when Fortran tries to execute the 
> LOG() function. The first thing to try is to switch TRNSYS into it's 
> "debug" mode. The switch can be found in the Simulation Studio control 
> cards (where you set the start and stop time). This does some extra 
> error checking and might give you a bit more of a hint about what is 
> going on. However, you will probably need to send your question in to 
> your distributor's hotline for assistance in debugging.
> Best,
>  david
>
>
> On 5/20/2014 08:40, Philip wrote:
>> Dear All,
>>
>> once I open and then save a validated and well working building model 
>> created on another PC I can not run the simulation anymore:
>>
>> I receive a "*Range check error*"!
>>
>> The building was created with the same TRNSYS version (17.01.0028) 
>> that I am using, the only difference is that I have a 32bit system 
>> and the building was created on a 64bit machine.
>>
>> Is this a known issue?
>> Is there a solution so that I can modify the building myself?
>>
>> Thanks a lot for your efforts!!!
>>
>> Best,
>> Philip
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com
>
> http://www.tess-inc.com
> http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140521/c7482686/attachment-0001.htm>


More information about the TRNSYS-users mailing list