[TRNSYS-users] Problems with Cooling Type Manager/Maximum above temperature

Jeff Thornton thornton at tess-inc.com
Wed Jan 28 05:13:44 PST 2015


Use a slightly different equation;

Tset = 24 * SCHED + 99 * (1 - SCHED)

Jeff Thornton

> On Jan 28, 2015, at 5:35 AM, Ole Nienaber <olenienaber at web.de> wrote:
> Dear All,
> I'm new here.
> I have a problem with the cooling demand of a building zone.
> I use the Cooling Type Manager to regulate my maximum temperature (24°c) in the zone. Also I use a schedule, because cooling isn't ON all the time.
> So my formula for the Cooling Type Manager is: 24*SCHED+0. And here is the problem. If my schedule is OFF (=0), than, of course, the cooling cools down my room temperature on 0°C. But I just want control, that the room temperature never increase over 24°C. Is there another way I could do it?
> Thanks a lot and I hope you all understand the problem.
> Greetings,
> Ole
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

More information about the TRNSYS-users mailing list