[TRNSYS-users] Weather Data parameters

[David BRADLEY]

Arnaud,
   I am not sure why the "azimuth of surface #" isn't getting recreated 
for each surface that you specify. It should be. It may be that either 
the Type15 proforma or the project file (*.tpf) has gotten corrupted. I 
would recommend that you send the project to your distributor for 
assistance.
kind regards,
  David


On 07/07/2015 07:09, Arnaud Candaele wrote:
> Hi all,
>
> I have a problem regarding the Weather Data parameters.
> Basically, in these parameters, I define a certain number of surfaces, 
> say 7. What it does is automatically create a number of additional 
> parameters, for each surface :
>
>   * tracking mode-#
>   * Slope of surface #
>
> ...and the last parameter is "Azimuth of surface", which appears only 
> that one time, and not for every surface as I would expect.
> So, this gives me 21 parameters. When I launch the computation I get 
> an error saying the unit 15 (Weather Data) requires 27 parameters and 
> only 21 are specified... which makes perfect sense, but ..why is 
> Simulation Studio not giving me these 27 parameters ?? What can I do ?
>
> If I correct manually the deck file, and specify these 27 parameters, 
> then run in batch (without going through Simulation Studio), it works 
> fine...
>
> Thanks for your help !
>
> Arnaud.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150707/3dfdffb3/attachment-0001.htm>