[BLDG-SIM] DOE question

[Paul Reeves]

DOE2.2 has a Ground-Loop-HX that can model horizontal or vertical wells of a
ground-source heat pump when attached to a circulation loop.  The
capabilities are considered to be in the "testing mode", but the fairly
detailed model is fully documented in the DOE2.2 support docs.

Paul Reeves
Partnership for Resource Conservation
140 S. 34th Street, Boulder, CO 80303
(303) 499-8611   Paul.Reeves at DOE2.com


-----Original Message-----
From: Postman at gard.com [mailto:Postman at gard.com]On Behalf Of Dominique
Michaud
Sent: Wednesday, August 16, 2000 2:20 PM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] DOE question


Is Doe capable of simulating a geothermal heat pump system?

If yes, through which command?

Thank you
Dominique Michaud

======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM