[Bldg-sim] help: doe2.1e capability in HP simulation

Steve Gates stvgates at pacbell.net
Tue Jun 11 13:46:32 PDT 2002


The capability to model a water/water chiller/heat-pump was recently added to DOE-2.2, Version 41.  This chiller can be coupled with the floor panel system to approximate the radiant floor,  and either a ground-loop heat-exchanger or a lake/well/sea to provide the source of heat.
  ----- Original Message ----- 
  From: marco.beccali at dream.unipa.it 
  To: Bldg-sim at gard.com 
  Sent: Friday, June 07, 2002 11:37 AM
  Subject: [Bldg-sim] help: doe2.1e capability in HP simulation


  Dear collegues,
  Does anyone knows if it is possible to simulate a water/water Heat Pump 
  connected to a radiant floor (for heating and cooling)with DOE2.1 (doeplus). 
  More: 
  can I provide a water temperature schedule (water from the sea)?
  can I also suppose to have a ground heat exchanger for the HP?
  Thanks in advance.
  Marco Beccali

  -------------------------------------------------
  This mail sent through IMP: www.dream.unipa.it
  Report bugs to Postmaster: lo_brano at dream.unipa.it


  ======================================================
  You received this e-mail because you are subscribed 
  to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
  from this mailing list send a blank message to 
  BLDG-SIM-UNSUBSCRIBE at GARD.COM



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20020611/0010d316/attachment-0002.htm>


More information about the Bldg-sim mailing list