[BLDG-SIM] Bulilding Simulation Software for Pools

[Werner Keilholz]

"Prefered tool" depends on who you ask, of course... ;-)

I know that there's a sample TRNSED application for swimming pools
made with TRNSYS 14.2 :

Swimming Pool Air Conditioning Simulation This demonstration models the
use of heat rejected by an air conditioner as a
     source for heating a swimming pool.

I reckon if TRNSYS 14 was able to do it 5 years ago, TRNSYS 15
should not have forgotten...

Werner

David Stewart wrote:

> Dear Group: I am looking at a 50.000 indoor pool and my question is
> this:Would Visual DOE be the preferred tool to simulate the building.
> It will have a dehumidifcation heat pump for the pool and a
> combination of distributed heat pumps and radiant floor water to water
> heat pumps fed by an open loop system. Thanks Dave Stewart

--
  /    \____ Werner Keilholz, Software Development Group Leader
  \____/     CSTB Sophia Antipolis, SAIL
  /    \____ s-mail: BP 209, 06904 SOPHIA ANTIPOLIS,  F R A N C E
  \____/     phone: +33 (0)4 93 95 67 00 -- fax: +33 (0)4 93 95 67 33
  /    \____ Mailto:werner at cstb.fr
  \____/     http://evl.cstb.fr/english/team/WK/werner.htm

  "If we knew what it was we were doing, it would not be called
   research, would it?"- Albert Einstein



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20030613/21d077d3/attachment-0002.htm>