[BLDG-SIM] Double Skin Buildings in Energy Plus
Curtis Pedersen
cpederse at uiuc.edu
Sun May 2 12:03:53 PDT 2004
Samuel:
Both Mixing and CrossMixing in EnergyPlus have the feature you
describe. Both objects have a "delta temperature" field that sets the
temperature difference for mixing. Look in the Input/Output Reference,
Group Air Flow, Objects: Mixing and Cross Mixing.
Curtis Pedersen
On May 2, 2004, at 5:06 AM, Samuel Hassid wrote:
> I am trying to simulate a Double Skin Building in Energy Plus and I
> have the fllowing dilema:
>
> One can choose between Simple AIRFLOW and COMIS.
>
> COMIS has the disadvantage that you have to simulate the whole
> building and will not accept non-communicating air paths - and besides
> cannot be used if you have a system simultaneously.
>
> My best solution would have been if I could use with MIXING a MIXING
> RATE which depends on the temperature difference and can be stopped if
> the temperature difference is less than, say, two degrees. This is
> something that can be done with VENTILLATION but not with MIXING. Does
> any one know a way around this difficulty ?
>
> Thanks
>
>
>
> ======================================================
> You received this e-mail because you are subscribed
> to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
> from this mailing list send a blank message to
> BLDG-SIM-UNSUBSCRIBE at GARD.COM
>
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
More information about the Bldg-sim
mailing list