[bldg-sim] Test room with thermal mass - Data sets available?

[Jeff Haberl]

I believe you'll find something useful in the research by Spitler et al. at Oklahoma State Univ. 

Jeff
BB 8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  :=')  8=)  8=)  8=? BB

Jeff S. Haberl, Ph.D., P.E.............................jhaberl at esl.tamu.edu

Professor......................................................Office Ph: 979-845-6507

Department of Architecture.......................Lab Ph: 979-845-6065 

Energy Systems Laboratory.......................FAX: 979-862-2457 

Texas A&M University..............................77843-3581

College Station, Texas, USA.......................URL: www-esl.tamu.edu

BB 8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=) 8=?  8=)  8=)  8= BB


-----Original Message-----
From: bldg-sim at gard.com <bldg-sim at gard.com>
To: bldg-sim at gard.com <bldg-sim at gard.com>
Sent: Fri Dec 02 07:05:47 2005
Subject: [bldg-sim] Test room with thermal mass - Data sets available?

Hi,

I am wondering, if any measurement data exists for a test room/chamber containing solid building material (e.g. a concrete or brick wall) concerning the dynamic influence of the thermal mass on the internal conditions. 
Of interest is the temperature and air flow distribution as well as the surface heat transfer for comparison with my CFD routine.

I'd greatly appreciate it, if somebody can tell where to find such a data set or can provide me with any.

Tobias Zitzmann

-- 
Dipl.-Ing. (FH) Tobias Zitzmann 
(Building Physics and Services)

University of Applied Sciences Coburg
Friedrich-Streib-Str. 2
96450 Coburg
Germany
Tel: +49 (0)9561 317 302
Email: zitzmann at fh-coburg.de

==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM