[bldg-sim] Procedure of modeling GSHP in eQUEST and hourly zone/coil loads

Liu, Xiaobing xiaobing.liu at okstate.edu
Fri Jan 28 13:49:42 PST 2005


I've further question with regard to the simulation of GSHP in eQUEST:
 
In order to evaluate the design of a GSHP, we need to know the water side loop temperature, ideally after multi-years operation. But, the standard eQUEST output doesn't provide these information. Does DOE 2.2 calculate the loop temperature of a GSHP? If so, is there any clue of getting the loop temperature from eQUEST?

 Thanks,

 Xiaobing


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20050128/0a62ed84/attachment-0002.htm>


More information about the Bldg-sim mailing list