[BLDG-SIM] double envelope
Leon Glicksman
glicks at MIT.EDU
Wed Jun 1 08:20:48 PDT 2005
the program Design Advisor handles this. You can access it at
DesignAdvisor.mit.edu
Leon Glicksman
At 07:24 PM 5/31/2005, Amit Khanna wrote:
>Dear all,
>
>I am working on a simulation of structure with a dynamic double envelope
>external wall. This external wall allows outside air to remove heat from
>the within the double envelope and depending on the inside/ outside
>conditions rejects it outside or supplies inside.
>
>Does anyone have any ideas for how to simulate this. Can I use it as a
>sun-space or separate thermal zones for each side(8" wide)? I am using
>EnergyPlus but am open to other tools if any help.
>
>Thanks
>Amit
>
>Amit Khanna
>LEED AP
>
>Research Assistant
>Architecture
>Virginia Tech.
>
>Ph. 540.559.7970
>
>
>
>
>You received this e-mail because you are subscribed
>to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
>from this mailing list send a blank message to
>BLDG-SIM-UNSUBSCRIBE at GARD.COM
Leon R. Glicksman
Professor of Building Technology and Mechanical Engineering
Room 5-418
Massachusetts Institute of Technology
Cambridge MA 02139
617 253 2233 glicks at mit.edu
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20050601/109a117c/attachment.htm>
More information about the Bldg-sim
mailing list