[bldg-sim] Setback temperatures for energy recovery units

[Vikram Sami]

Can anyone advice me on what appropriate setback temperatures are for a building with an energy recovery unit? Does it make sens to use the Standard ASHRAE setback temps of 55F heating & 90F cooling? Or should I be using something closer to the building setpoint temperatures?
 
Thanks

Vikram Sami,  LEED AP 
Direct Phone 404-253-1466 | Direct Fax  404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design * Technological Expertise * Exceptional Service 
www.lordaecksargent.com 

 


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20050502/29a00e62/attachment.htm>