[bldg-sim] eQUEST: In metric
Mahabir Bhandari
bhandari at fenestration.com
Thu Nov 3 06:12:15 PST 2005
Mike,
Switching the units in WINDOW5 will not create the report in IP. The DOE2
reports from WINDOW5 are always created in SI units. eQuest will take care
of units conversion.
Mahabir Bhandari
_____
From: Mike Tillou [mailto:miket at etcgrp.com]
Sent: Wednesday, November 02, 2005 9:07 PM
To: bldg-sim at gard.com
Subject: [bldg-sim] eQUEST: In metric
In Window 5 under the tools menu is an option for switching units. Switch
to IP before running the DOE report and you should be all set for importing
into eQuest.
Mike
Mike Tillou, PE
etc Group, Inc.
_____
From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of Martin YIP
Sent: Wednesday, November 02, 2005 5:07 PM
To: bldg-sim at gard.com
Subject: [bldg-sim] eQUEST: In metric
Dear bldg-sim members,
I came across the same problem when I tried to import glazing system from
window 5. The file created by window 5 is in SI unit. Thus when importing
to eQuest, the results were not correct. Can anyone give suggestion on
that? Thank you for your attention.
Regards
Martin YIP
-----Original Message-----
From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of Vaibhav
Potnis
Sent: Thursday, November 03, 2005 1:38 AM
To: bldg-sim at gard.com
Subject: [bldg-sim] eQUEST: In metric
As far as I know eQuest is not available in metric yet.
Vaibhav Potnis
Green Building Services, Inc.
Portland, OR
Contact - 503-467-4724
vaipotnis at hotmail.com
_____
From: Gerald Pde <geraldpde at yahoo.com>
Reply-To: geraldpde at yahoo.com
To: <bldg-sim at gard.com>
Subject: [bldg-sim] eQUEST: In metric
Date: Wed, 2 Nov 2005 06:49:33 -0800 (PST)
>Is there a way to change eQUEST into metric units? I
>can see the options under project properties in the
>detailed interface but the pull down menu is not
>activated.
>Thanks,
>Gerald
>
>
>
>
>__________________________________
>Yahoo! Mail - PC Magazine Editors' Choice 2005
>http://mail.yahoo.com
>
>======================================================
>You received this e-mail because you are subscribed
>to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
>from this mailing list send a blank message to
>BLDG-SIM-UNSUBSCRIBE at GARD.COM
>
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20051103/97736bfb/attachment-0002.htm>
More information about the Bldg-sim
mailing list