[BLDG-SIM] eQUEST v3.6 Report issues
Aulbach, John
jaulbach at nexant.com
Fri Dec 1 11:57:44 PST 2006
Are you sure there isn't a run error within the simulation itself? There
should be a .SIM file you can view through the "back door", and see if
something didn't compute.I have had similar situation, and a run error
within the simulation didn't spit out into the eQuest interface. Not all
errors show up in eQuest.
________________________________
From: BLDG-SIM at GARD.COM [mailto:BLDG-SIM at GARD.COM] On Behalf Of Vikram
Sami
Sent: Friday, December 01, 2006 11:25 AM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] eQUEST v3.6 Report issues
I recently downloaded eQUEST v3.6 build 5200, and after running a
simulation on it, I am unable to review any of the simulation results in
eQUEST (the eQUEST post simulation reports all show up blank).
Has anyone else has had similar problems? If so - is there a fix and
what is it?
Thanks
Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366
LORD, AECK & SARGENT ARCHITECTURE
Responsive Design * Technological Expertise * Exceptional Service
www.lordaecksargent.com <file://www.lordaecksargent.com>
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20061201/6709ebe1/attachment-0002.htm>
More information about the Bldg-sim
mailing list