[BLDG-SIM] Re-pathing a CAD background
Simeng Liu
sliu at archenergy.com
Fri Feb 17 08:05:23 PST 2006
You can modify the path of CAD file that is referenced by your eQuest
file in the pd2 file. Open it in text editor, and you will find the path
is defined at the bottom of the file.
Scott Runyon wrote:
> So is there anyway to detach it once I’ve completed my model using
> detailed edit mode?
>
> If I switch back to wizard, then all of that work in the detailed edit
> mode will be lost…and I don’t want that!
>
> Scott Runyon
>
> Design Engineer
>
> RMF Engineering, Inc.
>
> ------------------------------------------------------------------------
>
> *From:* BLDG-SIM at GARD.COM [mailto:BLDG-SIM at GARD.COM] *On Behalf Of
> *Scott Runyon
> *Sent:* Friday, February 17, 2006 9:40 AM
> *To:* BLDG-SIM at GARD.COM
> *Subject:* [BLDG-SIM] Re-pathing a CAD background
>
> I made my eQUEST model using CAD backgrounds and saved it on my computer.
>
> I copied the folders (model and backgrounds) to the network drive. I
> can get the model to come up, but it prompts me to browse for the cad
> file. I found it’s new location for each background, and the model ran
> fine.
>
> However, when I come back into it, eQUEST once again asked for the
> location of the CAD background files.
>
> What can I do to get it to recognize where the backgrounds are located
> every time I start the program up?
>
> Also, how do I purge/erase the result file listings for all the
> projects I’ve worked on in the left column every time I view a new
> simulation’s results?
>
> Thanks.
>
> -Scott Runyon
>
>
>
>
>
>==================
>
>You received this e-mail because you are subscribed
>
>to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
>
>from this mailing list send a blank message to
>
>BLDG-SIM-UNSUBSCRIBE at GARD.COM
>
>======================================================
>You received this e-mail because you are subscribed
>to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
>from this mailing list send a blank message to
>BLDG-SIM-UNSUBSCRIBE at GARD.COM
>
>
--
Simeng Liu
Staff Engineer, Energy Analysis Group
Architectural Energy Corporation
2540 Frontier Avenue, Suite 201
Boulder, Colorado 80301
Phone: 303-444-4149
Fax: 303-444-4304
E-mail: sliu at archenergy.com
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
More information about the Bldg-sim
mailing list