[bldg-sim] Zoning in eQuest

Sean Henry SeanH at ieice.com
Wed Feb 15 16:13:50 PST 2006


Yes.
Under the Design Development wizard, from the "Project Navigator"
screen, you can create new building shells after you have setup and laid
out a single story shell .
When creating a new shell you have the option to copy one you have
already made.
This copy can then be located above the original building shell and
modified with a different zoning pattern.
Please feel free to contact me if you require more clarification.
This can all be done from detailed edit mode but it is more time
consuming.
Sean 
 
Sean Henry, LEED(r) AP | Energy Specialist

INTERFACE ENGINEERING 
708 SW Third Avenue | Suite 400 | Portland, OR 97204 

direct: 503.382.2295
office: 503.382.2266
fax: 503.382.2262
email: seanh at ieice.com
web: www.ieice.com 

Consultants of Choice to the Built Environment for over 35 years
Kirkland, WA | Portland, OR | Sacramento, CA | Salem, OR | 



________________________________

From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of Sarathy
Narasimhan
Sent: Wednesday, February 15, 2006 3:58 PM
To: bldg-sim at gard.com
Subject: [bldg-sim] Zoning in eQuest



Thanks all for helping with my previous question on condenser water
control. 

 

My next hurdle - can we create different zones on eQuest on different
levels? I tried zoning a 5 story medical office building on eQuest but I
couldn't specify separate zones for different levels. Is it possible to
do it? If so, I would appreciate all the help I can get.

 

Thank you,

Sarathy

 





















You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060215/235c93b4/attachment-0002.htm>


More information about the Bldg-sim mailing list