[bldg-sim] Help needed for Type 460 module of TRNSYS
David Bradley
bradley at tess-inc.com
Tue Jan 3 06:36:13 PST 2006
Yatin,
The Type460 documentation describes the syntax of the external parameter
file that describes the geometry of the hypocaust. To change the geometry,
you need to change the external parameter file. I will send you a second
email containing the documentation file as well as a few other example
geometry files that I have used in some of my projects.
Kind regards,
david
At 08:05 1/1/2006, Yatin Choudhary wrote:
>hi every one,
>i am facing problem in understanding the parameter files of module, can any
>one guide configuring of the TYPE 460 : HYPOCAUST (AIR-TO-SOIL EXCHANGER)
>module, for defining parameter defination and control file.
>attaching example file (how to change geometery of hypocaust?)
>thanking you all.
>Yatin Choudhary
>
>
>************************************************
>* TYPE 61 SUPPLIED PARAMETERS
>*===============================================
>* Nmod,Nsec,Nsoil,Nsurf,NI,NJ,NK [-]:
> 2 3 2 3 13 12 7
>
>* DX [m]:
> 0.1000E+01 0.1000E+01 0.6666E+00 0.6666E+00
> 0.6666E+00 0.6666E+00 0.6666E+00 0.6666E+00
> 0.6666E+00 0.6666E+00 0.6666E+00 0.1000E+01
> 0.1000E+01
>
>* DY [m]:
> 0.1000E+01 0.1000E+01 0.3000E+00 0.2000E+00
> 0.2000E+00 0.2000E+00 0.2000E+00 0.2000E+00
> 0.2000E+00 0.2000E+00 0.2000E+00 0.1000E+00
>
>* DZ [m]:
> 0.4000E+00 0.2000E+00 0.2000E+00 0.2000E+00
> 0.2000E+00 0.2000E+00 0.4000E+00
>
>* TypSec [-]:
> 1 1 2 2 2 3 3 3 3 3 3 1
> 1
>
>* TypSoil for front surface [-]:
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
>
>* TypSoil for sec# 1 [-]:
> 3 3 3 3 3 3 3 3 3 3 3 3
> 0 2 2 2 2 2 2 2 2 2 2 2 2 0
> 0 2 2 2 2 2 2 2 2 2 2 2 2 0
> 0 2 2 2 2 2 2 2 2 2 2 2 2 0
> 0 2 2 2 2 2 2 2 2 2 2 2 2 0
> 0 2 2 2 2 2 2 2 2 2 2 2 2 0
> 0 2 2 2 2 2 2 2 2 2 2 2 2 0
> 0 2 2 2 2 2 2 2 2 2 2 2 2 0
> 0 0 0 0 0 0 0 0 0 0 0 0
>
>* TypSoil for sec# 2 [-]:
> 3 3 1 1 1 1 1 1 1 1 1 1
> 0 2 2 1 1 1 1 1 1 1 1 1 1 0
> 0 2 2 1 0 1 1 1 0 1 1 1 0 0
> 0 2 2 1 1 1 1 1 1 1 1 1 1 0
> 0 2 2 1 1 1 0 1 1 1 0 1 1 0
> 0 2 2 1 1 1 1 1 1 1 1 1 1 0
> 0 2 2 1 0 1 1 1 0 1 1 1 0 0
> 0 2 2 1 1 1 1 1 1 1 1 1 1 0
> 0 0 0 0 0 0 0 0 0 0 0 0
>
>* TypSoil for sec# 3 [-]:
> 3 3 2 2 2 2 2 2 2 2 2 2
> 0 2 2 1 1 1 1 1 1 1 1 1 1 0
> 0 2 2 1 0 1 1 1 0 1 1 1 0 0
> 0 2 2 1 1 1 1 1 1 1 1 1 1 0
> 0 2 2 1 1 1 0 1 1 1 0 1 1 0
> 0 2 2 1 1 1 1 1 1 1 1 1 1 0
> 0 2 2 1 0 1 1 1 0 1 1 1 0 0
> 0 2 2 1 1 1 1 1 1 1 1 1 1 0
> 0 0 0 0 0 0 0 0 0 0 0 0
>
>* TypSoil for rear surface [-]:
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0 0 0 0 0 0
>
>* PosInf [-]:
> 1 1 1 9 12 7
>
>* Kair0 [kJ/hr K m2], ,Kair1 [(kJ/hr K m2)/(m/s)]:
> 0.1800E+02 0.1400E+02
>
>* LamSoil [kJ/hr K m], CvSoil [kJ/K m3]:
> 0.7200E+01 0.1000E+04
> 0.5400E+01 0.1000E+04
>
>* LamTub [kJ/hr K m], CvTub [kJ/K m3]:
> 0.7200E+01 0.1000E+04
>
>* ThTub [m], CtubCor [-], Rfric [-]:
> 0.5000E-02 0.8862E+00 0.2000E-01
>
>* TypWat [-], Vwat [m/hr]:
> 1 1 1
> 0.0000E+00 0.0000E+00 0.0000E+00
>
>* NiniSoil,NiniWat [-]:
> 2 1
>
>* TiniSoil [degC], PosIniSoil [-]:
> 0.1500E+02
> 0.1000E+02 3 3 1 11 12 7
>
>* ThIniWat [m], PosIniWat [-]:
> 0.0000E+00
>
>* Nopt [-]:
> 17
>
>* TypOpt [-], PosOpt [-]:
> 107 3 3 1 5 12 1
> 107 6 3 1 11 12 1
> 103 3 3 1 3 12 7
> 104 11 3 1 11 12 7
> 105 3 3 1 11 3 7
> 202 1 1 1 1 1 1
> 203 1 1 1 1 1 1
> 204 1 1 1 1 1 1
> 22 3 3 1 11 12 7
> 109 3 3 1 11 12 7
> 5 3 3 1 11 12 7
> 6 3 3 1 11 12 7
> 9 11 3 1 11 12 7
> 1 4 3 1 4 12 7
> 1 6 3 1 6 12 7
> 1 8 3 1 8 12 7
> 1 10 3 1 10 12 7
>************************************************
>
>************************************************
>* TYPE 61 DERIVED PARAMETERS
>*===============================================
>* Ntub [-]: 8
>* IflowIni [-]: 3
>* IflowEnd [-]: 11
>* PosTub # 1 [-]: 4 2
>* PosTub # 2 [-]: 4 6
>* PosTub # 3 [-]: 6 4
>* PosTub # 4 [-]: 8 2
>* PosTub # 5 [-]: 8 6
>* PosTub # 6 [-]: 10 4
>* PosTub # 7 [-]: 12 2
>* PosTub # 8 [-]: 12 6
>* LX [m]: 0.9999E+01
>* LY [m]: 0.8000E+01
>* LZ [m]: 0.1800E+01
>* Ltub [m]: 0.5999E+01
>* SairTot [m2]: 0.5600E+00
>* StubTot [m2]: 0.5955E+02
>* ZairTot [m5/2]: 0.2660E+00
>* SinfTot [m2]: 0.4631E+02
>* Sbord # 1 [m2]: 0.7999E+01
>* Sbord # 2 [m2]: 0.1600E+02
>* Sbord # 3 [m2]: 0.5600E+02
>* Kbord # 1 [kJ/hr K m2 0.3600E+02
>* Kbord # 2 [kJ/hr K m2 0.3600E+02
>* Kbord # 3 [kJ/hr K m2 0.2700E+02
>* DtSoil [hr]: 0.5019E+00
>* DtWat [hr]: none
>* FairMinTub [m3/hr]: 0.1988E+03
>************************************************
>
>************************************************
>* TYPE 61 SIMULATION PARAMETERS
>*===============================================
>* Dt [hr]: 0.6000E-01
>* FairMin [m3/hr]: 0.1000E+00
>************************************************
>
>
>======================================================
>You received this e-mail because you are subscribed
>to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
>from this mailing list send a blank message to
>BLDG-SIM-UNSUBSCRIBE at GARD.COM
****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY 2916 Marketplace Drive - Suite 104
Partner Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages: http://www.tess-inc.com and http://www.trnsys.com
"Providing software solutions for today's energy engineering projects"
****************************************************************************************
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
More information about the Bldg-sim
mailing list