[bldg-sim] Multi-level zoning in eQuest
John F. Kennedy
jfk at greenbuildingstudio.com
Fri Jan 20 13:23:37 PST 2006
Kendra,
As others have suggested, you can use a unique shell in the design
development wizard and define custom zone shapes for each shell, but you
need to be careful as the current version of eQuest does not do vertical
clipping of horizontal surfaces to determine the horizontal surfaces
(floors and roofs) that are exposed to outside conditions and those that
are in contact with an adjacent space in the adjacent shell. This is a
significant concern if your floor plates are different shapes and
orientations.
I believe the eQuest development team is currently trying to correct
this issue.
John F. Kennedy
Green Building Studio, Inc.
www.greenbuildingstudio.com <http://www.greenbuildingstudio.com/>
707.569.7373 v
707.569.7313 f
707.235.1335 c
________________________________
From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of Tupper,
Kendra
Sent: Tuesday, January 17, 2006 9:13 AM
To: bldg-sim at gard.com
Subject: [bldg-sim] Multi-level zoning in eQuest
Does anyone know if it's possible to create different zoning patterns
per floor in the Design Wizard in eQuest? Manually, it can be done in
Detailed Data Edit mode, but I know I did it once before in the wizard.
Thanks,
Kendra Tupper
FLACK + KURTZ
405 Howard Street 415.398.3833 Main
Suite 500 415.402.5840 Direct
San Francisco, CA 94105 415.433.5311 Fax
http://www.flackandkurtz.com kendra.tupper at sf.fk.com
<mailto:kendra.tupper at sf.fk.com>
This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this e-mail in
error)
please notify the sender immediately and destroy this e-mail.
Any unauthorized copying, disclosure or distribution of the material
in this e-mail is strictly forbidden.
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060120/58ec91cd/attachment-0002.htm>
More information about the Bldg-sim
mailing list