[bldg-sim] Multi-level zoning in eQuest
Sean Henry
SeanH at ieice.com
Tue Jan 17 09:39:54 PST 2006
Yes.
Under the Design Development wizard, from the "Project Navigator"
screen, you can create new building shells after you have setup and laid
out a single story shell .
When creating a new shell you have the option to copy one you have
already made.
This copy can then be located above the original building shell and
modified with a different zoning pattern.
Please feel free to contact me if you require more clarification.
As you mentioned, this can all be done from detailed edit mode but it is
more time consuming.
Sean Henry
Sean Henry, LEED(r) AP | Energy Specialist
INTERFACE ENGINEERING
708 SW Third Avenue | Suite 400 | Portland, OR 97204
direct: 503.382.2295
office: 503.382.2266
fax: 503.382.2262
email: seanh at ieice.com
web: www.ieice.com
Consultants of Choice to the Built Environment for over 35 years
Kirkland, WA | Portland, OR | Sacramento, CA | Salem, OR |
________________________________
From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of Tupper,
Kendra
Sent: Tuesday, January 17, 2006 9:13 AM
To: bldg-sim at gard.com
Subject: [bldg-sim] Multi-level zoning in eQuest
Does anyone know if it's possible to create different zoning patterns
per floor in the Design Wizard in eQuest? Manually, it can be done in
Detailed Data Edit mode, but I know I did it once before in the wizard.
Thanks,
Kendra Tupper
FLACK + KURTZ
405 Howard Street 415.398.3833 Main
Suite 500 415.402.5840 Direct
San Francisco, CA 94105 415.433.5311 Fax
http://www.flackandkurtz.com kendra.tupper at sf.fk.com
<mailto:kendra.tupper at sf.fk.com>
This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this e-mail in
error)
please notify the sender immediately and destroy this e-mail.
Any unauthorized copying, disclosure or distribution of the material
in this e-mail is strictly forbidden.
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060117/c86bd95a/attachment-0002.htm>
More information about the Bldg-sim
mailing list