[BLDG-SIM] Software for Modelling Ventilation and Thermal Mass
Tupper, Kendra
Kendra.Tupper at sf.fk.com
Thu Jun 8 09:04:52 PDT 2006
I'm currently working on a project in Berkeley, CA with an underground
concrete building with very high thermal mass. We would like to avoid
air conditioning by mechanically ventilating the building at night, and
would like to model this for some preliminary results.
Does anyone have any suggestions for an appropriate software program to
model this? Are the ground heat transfer/thermal mass modeling
capabilities of DOE 2.2 are sufficient to model this project in eQuest
or Visual DOE?
Right now, we are planning on using EnergyPlus, but I wanted to make
sure there wasn't another (less time consuming option) out there! Does
anyone know if any of the EnergyPlus interfaces could handle this (i.e.
Design Builder)?
Thank you!
Kendra
Kendra Tupper
FLACK + KURTZ
405 Howard Street 415.398.3833 Main
Suite 500 415.402.5840 Direct
San Francisco, CA 94105 415.433.5311 Fax
http://www.flackandkurtz.com kendra.tupper at sf.fk.com
This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this e-mail in
error)
please notify the sender immediately and destroy this e-mail.
Any unauthorized copying, disclosure or distribution of the material
in this e-mail is strictly forbidden.
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060608/1f130808/attachment.htm>
More information about the Bldg-sim
mailing list