[BLDG-SIM] Importing eQUEST Simulation File Reports into Excel/Word etc.

[Andrew Craig]

I was wondering if anyone had any hints or suggestions for an easier way
to import the simulation file reports from eQUEST into modern word
processing or spreadsheet software.  Right now when I try to copy and
paste a report from a standard text editor the spacing gets really
screwed up.   I know that the type set or format for the reports is
antiquated (dot matrix?) and is the reason for some of the problems, but
I don't know how to fix it.  Is there a more advanced text editor or
software that can help with this problem or is it a computer code issue?
Any help would be greatly appreciated.

Andrew Craig | Mechanical Designer, Energy Modeler

INTERFACE ENGINEERING 
708 SW Third Avenue | Suite 400 | Portland, OR 97204 

direct: 503.382.2696
office: 503.382.2266
fax: 503.382.2262
email: Andrew_C at ieice.com
web: www.ieice.com 

Consultants of Choice to the Built Environment for over 35 years
Kirkland, WA | Portland, OR | Sacramento, CA | Salem, OR | SanFrancisco,
CA

 



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20061024/f30cdffb/attachment.htm>