[BLDG-SIM] CO2 Sensors in eQuest

[Sean Henry]

Mike: 

Take a look at the Air side system parameters, under the "outside air
and economizer" tab. 

"Min OA control method" a gives you DCV options.

DOE2.2 Volume 6: New Features has a discussion of the methodology.

I hope this is what you were looking for.

Best Regards,

 

S.P. Henry

Interface Engineering

________________________________

From: BLDG-SIM at GARD.COM [mailto:BLDG-SIM at GARD.COM] On Behalf Of Dillon,
Mike
Sent: Friday, September 22, 2006 1:34 PM
To: BLDG-SIM at GARD.COM
Subject: [BLDG-SIM] CO2 Sensors in eQuest

 

I apologize if this has been asked before. Does anyone know if there is
a way to model CO2 demand sensors in eQuest. 
Thanks in advance for the help. 

Mike 

Mike Dillon E.I.T. 
DSM Engineering Technician 
Avista Utilities 
1411 E. Mission Avenue - MSC 15 
Spokane, Washington 99202 
Phone: 509.495.4260 
Mobile: 509.270.6453 
Fax: 509.777.6136 
www.avistautilities.com <file:///\\www.avistautilities.com>  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060922/f48c84b5/attachment-0002.htm>