[BLDG-SIM] separate buildings or floors

[Kingsley, Michael L.]

I want to use eQUEST to model a building that has a base footprint on
the lower levels but upper levels are not contiguous (like separate
towers rising from the base).  What is the best way to define the upper
levels?  If I define the polygon shape for the upper levels but don't
fill it in completely with the building, will eQUEST ignore the floor
area between the towers that is not assigned to zones?  

 

Alternately, is there a way to model 2 separate buildings that use the
same heating & cooling plants?

 

Thanks

 

Michael L. Kingsley

SAIC

East Syracuse, New York 13057

E-mail <mailto:kezark at saic.com> :  kingsleym at saic.com
<mailto:kezark at saic.com> 

 



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070108/609dab1e/attachment.htm>