[BLDG-SIM] Modeling a pool in eQuest [mistake in 1st email]
Karen Walkerman
kwalkerman at gmail.com
Mon Jul 30 06:45:22 PDT 2007
Oos. That's 55 lbs/hr total, not per sf.
On 7/30/07, Karen Walkerman <kwalkerman at gmail.com> wrote:
>
> Hello All,
>
> Has anyone modeled a pool in eQuest? I am modeling a space that contains
> a 24 X 44 foot pool. I'm estimating 55 lbs/hr of evaporation per sf of
> surface area (for any period of time when the pool is uncoverd). At a
> minimum I need to model space dehumidification and the energy needed to heat
> the pool and replacement water. I checked the help files and am using a
> reheat fan system, as suggested.
>
> I can simply input a latent load into the space to simmulate the humidity,
> and manually calculate and input an energy load for pool heat, but I'd like
> to do better.
>
> Thanks,
>
>
> --
> Karen Walkerman
> 802-238-0980
> kwalkerman at gmail.com
>
--
Karen Walkerman
802-238-0980
kwalkerman at gmail.com
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070730/8f7ace8c/attachment-0002.htm>
More information about the Bldg-sim
mailing list