[BLDG-SIM] Energy savings from oprating fan of HVAC system alone
Peterson, John
JPeterson at Vanderweil.com
Fri Jun 15 06:12:40 PDT 2007
That's too hard to say. It would depend on the systems used & modeled.
Most can tell you exactly how much energy a fan is pouring out, and you
can run a few quick simulations in Carrier's HAP to figure out how much
is fan vs. chillers & pumps. BTW, coils don't have an energy use
associated with them.
John Peterson, PE, LEED AP
R.G. Vanderweil Engineers, LLP
625 N. Washington Street Alexandria, VA 22314-1913
Tel: (703) 683-9700
Fax: (703) 683-2480
www.vanderweil.com
________________________________
From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of
Kofoworola
Sent: Friday, June 15, 2007 1:17 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Energy savings from oprating fan of HVAC system
alone
what percentage of energy can be saved by running just the fan of an
HVAC equipment as against when the whole system (fan, cooling coils,
chillers, AHU) is running?
Thanks
--
Kofoworola, O.F.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070615/4f9ea18a/attachment-0008.htm>
More information about the Bldg-sim
mailing list