[BLDG-SIM] DOE2.1e HP problem
Chris Jones
cj at cr-jay.ca
Tue Mar 27 06:54:30 PDT 2007
I received an email from Jeff Hirsch. DOE2.1e does not support two
hydronic loops. The heat pump loop is a separate loop even when
using FROM-PLANT. Therefore you can't also have hydronic baseboards
or a hydronic make-up air system. One would need to use
DOE2.2. Apparently it is time for me to climb that learning curve.
At 09:51 2007-03-26, Chris Jones wrote:
>I am modelling an HP system using the heating and cooling
>FROM-PLANT. This works fine unless I try adding hydronic
>baseboards. DOESIM crashes. If I use electric baseboards it runs
>fine. I am using DOE-2.1En136 from DOE2.com.
>
>Has anyone had any experience with this problem?
>
>
>
>
>Chris Jones, P.Eng.
>14 Oneida Avenue
>Toronto, ON M5J2E3
>Tel. 416 203-7465
>Fax. 416 946-1005
>
>
>======================================================
>You received this e-mail because you are subscribed
>to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
>from this mailing list send a blank message to
>BLDG-SIM-UNSUBSCRIBE at GARD.COM
Chris Jones, P.Eng.
14 Oneida Avenue
Toronto, ON M5J2E3
Tel. 416 203-7465
Fax. 416 946-1005
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070327/a499ef70/attachment-0002.htm>
More information about the Bldg-sim
mailing list