[BLDG-SIM] D2SimViewer out of memory
Brad Acker
backer at uidaho.edu
Wed May 2 16:52:18 PDT 2007
Problem solved and was related to the below advice. The first time I
ran the simulation and the "view simulation results" window popped up
I hit OK and it took awhile, so thinking I did not click OK I clicked
it again. Soon two simulation reports opened. I closed one and had
the "out of memory problem". After the below advice I closed the
original simulation report and ran the simulation again. This time the
copy function worked.
Thanks All,
-Brad
----- Original Message -----
From: Aleka Pappas <APappas at enermodal.com>
Date: Wednesday, May 2, 2007 4:53 pm
Subject: Re: [BLDG-SIM] D2SimViewer out of memory
To: backer at uidaho.edu
> Hi Brad,
> That happens to me if I have more than one sim file open.....
> It usually is fine if I close all but the one I'm working on.
>
> Hope that helps.
> Aleka
>
> Aleka Pappas
> Enermodal Engineering, Inc.
> Denver, CO
> tel: 303.861.2070
> fax: 303.830.2016
> www.enermodal.com
>
>
>
> Brad Acker wrote:
> > I'm in the D2Sim Viewer (from eQuest) and I want to cut and
> paste to a
> > spreadsheet. When I try to cut a window comes up that tells
> > me "D2Simviewer out of memory". Any work arounds for this?
> >
> > Thanks, Brad
> >
> > ======================================================
> > You received this e-mail because you are subscribed
> > to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
> > from this mailing list send a blank message to
> > BLDG-SIM-UNSUBSCRIBE at GARD.COM
> >
> >
> >
>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
More information about the Bldg-sim
mailing list