[BLDG-SIM] window 5 to doe 2

[Kevin Burke]

Hi,

 

1.	Export your glazing file from Window 5 and saving it as a doe.2 
2.	Open up a fresh (default) eQuest model, go into detailed mode
and save it. 
3.	Scroll down to "Glass Types" in the window on the left hand side
of your default eQuest model and right click so that it says "Import
Window4/5 Report file". There you can source and add your glazing file. 
4.	Save the default eQuest file you created
5.	Go into the resulting .inp file, copy the relevant glazing data
and paste it into your working eQuest model .inp file. 

 

I think it's safer to do this outside of your working eQuest file and
copy in so as to avoid corrupting your working file it if you get it
wrong. Hope this helps

 

Kevin Burke

 

________________________________

From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of jimmy
jungle
Sent: 10 September 2007 16:09
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] window 5 to doe 2

 

i believe this question has been asked several times on this forum but
never been answered (at least i couldn't find it). i created a window 5
file that i want to import into eQUEST.  i exported using 'report' from
window 5 and saved for doe2. doesnt work! 

could someone enlighten the 'real' protocol of importing W5? thanks for
all the inputs in advance


-- 
Jimmy Jungle 

____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070910/ce0a05ed/attachment-0002.htm>