[Bldg-sim] [Equest-users] No results available after runs completed successfully

eric wang shaojieworld2006 at yahoo.com
Tue Aug 5 07:38:42 PDT 2008


Hi Karen,
 
Finally I recreated my model and the problem is gone. However, I still don't know what causes such a weired issue. Thanks a lot for all your kind help. 
 
Shaojie


--- On Thu, 7/31/08, Karen Walkerman <kwalkerman at gmail.com> wrote:

From: Karen Walkerman <kwalkerman at gmail.com>
Subject: Re: [Equest-users] No results available after runs completed successfully
To: "eric wang" <shaojieworld2006 at yahoo.com>
Cc: equest-users at lists.onebuilding.org, bldg-sim at lists.onebuilding.org
Date: Thursday, July 31, 2008, 9:45 PM



When eQuest runs, it creates a couple .csv files with run results.  these files contain monthly total energy use and peak use in all categories, summed for the building.  Perhaps eQuest cannot find these files?  The files are usually placed in the project folder.  I have never had this problem before, but this is where I would start.


--
Karen




      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080805/cb7ef658/attachment.htm>


More information about the Bldg-sim mailing list