[Bldg-sim] EQuest: Floor addition

[Bruno Lee]

You could do that within the detail interface.

Under "Building Shell", open up "Component Tree"

1) general default case, right click on "Mid Flrs", and select  
"Properties...."; all floors other than the top or ground floor are  
simply multiplier of the mid floor, you just add floor by changing the  
"Multiplier" in the properties screen.

2) if you would like to define floor by floor, right click on the  
"Project:...", and select "Create Floor ...." from the menu.

Bruno Lee
M.S. Student
Department of Architectural Engineering
Penn State University


On Aug 27, 2008, at 10:07 AM, Alexandra Waranowski wrote:

> Hi,
>
> I want to add another floor to my building, but I am already within  
> the detail interface. Is there a way that I could go back into the  
> wizard and create another floor without creating problems?
>
> Thanks for any advise that can be provided!
>
> Regards,
> Alexandra Waranowski
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG