[Bldg-sim] Appendix G - Base Case Orientations and Glazing

[Brenda V. Morawa]

I agree and was looking for that reference as we speak!

 

Brenda V. Morawa, PE LEED AP QCxP

Co-Vice-Chair, USGBC LEED Certification Committee

BVMELogo3jpg

404.806.2018  EXT 101

404.210.6593 (cell)

 

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Paul Riemer
Sent: Monday, December 01, 2008 9:22 AM
To: 'James V. Dirkes II P.E.'; 'Ulrik Welle-Strand Horn';
bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Appendix G - Base Case Orientations and Glazing

 

I read Table G3.1 section 5 sub item (c) under the baseline building
performance column to require use of the "SHGC_all" for all vertical
glazing.  Have others read that and reached a different conclusion?  Did I
miss an addenda? or a CIR?

 

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of James V. Dirkes
II P.E.
Sent: Monday, December 01, 2008 8:09 AM
To: 'Ulrik Welle-Strand Horn'; bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Appendix G - Base Case Orientations and Glazing

 

Dear Ulrik,

 

Since the intent of the Standard is to assign the better glazing performance
to non-North walls, I always rotate the glazing characteristics with the
building. (e.g., I assign the "North" glazing characteristics to the
elevation that, after rotating, faces North)

 

The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653

 

 

 

  _____  

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Ulrik
Welle-Strand Horn
Sent: Monday, December 01, 2008 7:30 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Appendix G - Base Case Orientations and Glazing

Dear all,

When you are rotating the building through 4 different orientations, do you
change the glazing so that the glazing with the highest SHGC is always faces
north, or do you put the glazing with high SHGC on the original north
facade, and then rotate the building so that the high SHGC glazing faces the
east, south and west orientations in subsequent simulations?

Yours faithfully,


Ulrik Welle-Strand Horn 
Sustainability Engineer


Silpa Inc.
s i m p l e  .  s c i e n t i f i c  .  s u s t a i n a b l e

AMERICAS | MIDDLE EAST | ASIA
www.silpainc.com
<http://console.mxlogic.com/redir/?1psKUPuX9JdZZWXPPxI05ihWSOxrBYdTdTdA3Q29u
ABiV2Hsbvg57OFeDlxV1KhW4E4u00CTHFK6QkQTAmbI3APrypI5-Aq83iScDE4iZ9aCBQQg22OTM
gA7Cy096y0Kq81Dquq81bquq80N6nMDIVlxgQgr10Qg18_hik29KvxYY1NJ4SyrjvvuKYYYrV6r6
> 


India: +91.90080.96083

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20081201/2dc9fb09/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2325 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20081201/2dc9fb09/attachment-0002.jpeg>