[Bldg-sim] FW: Geothermal Water to Water Source Heat Pumps

[Keith Lane]

I am attempting to model a geothermal system with two water to water source heat pumps that will generate 115˚ to 120˚ F water to a supplemental boiler to further raise the temperature to 150˚ F for the hot water loop of the system. On the hot/chilled water side of the system will be fan coil or induction units. Is this possible to model in eQuest? If so I would really appreciate any guidance/suggestions on how this can be accomplished.

 

Thank you in advance. 

 

Keith Lane, LEED AP

Mechanical Engineer

Garcia.Galuska.DeSousa

Consulting Engineers                     Inc.                        

370 Faunce Corner Road, Dartmouth, MA 02747 

p.508.998.5700                          f. 508.998.0883

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080214/122a861c/attachment.htm>