[Bldg-sim] Supply temperature reset in ASHRAE baseline

Kevin Kyte kkyte at robsonwoese.com
Fri Feb 29 06:35:22 PST 2008


So how exactly does one do G.3.1.3.12?  If a cool reset schedule were setup
then it would reference supply air to outside air, right?  Shouldn't it be
supply air and zone loads?

Kevin Kyte, LEED AP
RobsonWoese, Inc.
(T) 716-636-1800
(F) 716-636-1856
http://robsonwoese.com

-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of yizhao1 at vt.edu
Sent: Thursday, February 28, 2008 9:12 PM
To: Aulbach, John
Cc: bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Supply temperature reset in ASHRAE baseline


The one in the zone  level appear to be for baseboard control.


Quoting "Aulbach, John" <jaulbach at nexant.com>:

> Isn't Package VAV a Terminal System? The reheat coil control should on
> the ZONE Level, not the SYSTEM level.
>
> I think..
>
> -----Original Message-----
> From: bldg-sim-bounces at lists.onebuilding.org
> [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of
> yizhao1 at vt.edu
> Sent: Thursday, February 28, 2008 5:00 PM
> To: bldg-sim at lists.onebuilding.org
> Subject: [Bldg-sim] Supply temperature reset in ASHRAE baseline
>
> Hi -
> In the baseline, ASHRAE requires a supply air temperature reset for
> system 5, packaged rooftop VAV w/ reheat (G3.1.3.12). In the air side
> system level, I can set up a schedule for cool control, but heat control
> is in grey.
> Does anyone know how to input the reset in the system? Economizer is
> inlcuded.
>
> Thanks!
>
> Ying
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG





More information about the Bldg-sim mailing list