[Bldg-sim] hot water loop from a hydronic heat pump
Ramana Koti
ramana.koti at gmail.com
Mon Mar 10 07:25:53 PDT 2008
Dear all,
For space heating and/or domestic hot water, is there a way to directly
model a hot water loop coming from a heat hydronic heat pump
(fuel:electricity) in eQUEST?
Is there a good workaround via an electric hot water boiler? what would be a
good EIR number for an electric HW Boiler that's connected to such a hot
water loop ? I notice DOE-2's default number in eQUEST is 1.02 but can't
tell if that's a good default to fall back on. The range is as wide as 0 to
10 and the Heat Input Ratio field is greyed out.
Thanks,
Ramana Koti, LEED AP
Sustainable Building Analyst
ELEMENTS division of BNIM architects
106 W. 14th Street Suite 200
Kansas City, Missouri 64105
p 816.783.1635 f 816.783.1501
www.bnim.com| elements.bnim.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080310/5fe7ac02/attachment.htm>
More information about the Bldg-sim
mailing list