[Bldg-sim] Non enduse heat loads eQUEST

[Chatfield, Gary]

Does anyone know how to model the heat output of electrical panels
without including the load on the electrical meter within eQUEST?

 

I have a number of panels located in electrical/mechanical rooms that
require to be taken into account for their heat load but the electrical
cost element of the panels is taken into account in the room being
served enduses.

 

Gary Chatfield

LEED(r) AP      

  FLACK + KURTZ

385 Pilot Road

Suite D

Las Vegas, NV  89119

http://www.flackandkurtz.com <http://www.flackandkurtz.com/>   

702.897.8181 Main

702.352.9562 Direct

702.914.6966 Fax
gary.chatfield at lv.fk.com

Ensuring that today's built environment preserves the natural
environment in which we live.

This e-mail may contain confidential and/or privileged information. If
you are not the intended recipient (or have received this e-mail in
error) please notify the sender immediately and destroy this e-mail.
Any unauthorized copying, disclosure or distribution of the material in
this email is strictly forbidden.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080316/be936776/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 837 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080316/be936776/attachment.gif>