[Bldg-sim] zero cooling load in BEPS report

[Ramana Koti]

Dear all,

The project is a mixed use building with offices and a hotel. The system is
VAV  with chillers and cooling towers. The hotel rooms use fan coil units.

In eQUEST, after the condenser water loop is utilized for a water side
economizer loop for the office floors, the space cooling in the BEPS report
shows up as zero. Any ideas on what's going wrong? Any suggestions on
troubleshooting the issue are appreciated.

Thanks,

Ramana Koti, LEED AP
Sustainable Building Analyst

ELEMENTS division of BNIM architects
106 W. 14th Street Suite 200
Kansas City, Missouri 64105

p 816.783.1635 f 816.783.1501
www.bnim.com| elements.bnim.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20080327/78bc8fa8/attachment.htm>