[Bldg-sim] Schedules used to estimate Daylight Savings-eQuest

[Jeff Haberl]

FYI. 

Try going into the BDL and set DAYLIGHT-SAVINGS = YES. I believe this was carried-over from DOE2.1e.  There should be something in the manual on this as well.  

Jeff
BB 8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  :=')  8=)  8=)  8=? BB

Jeff S. Haberl, Ph.D., P.E., FASHRAE...................jhaberl at esl.tamu.edu

Professor......................................................Office Ph: 979-845-6507

Department of Architecture.......................Lab Ph: 979-845-6065 

Energy Systems Laboratory.......................FAX: 979-862-2457 

Texas A&M University..............................77843-3581

College Station, Texas, USA.......................URL: www-esl.tamu.edu

BB 8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=) 8=?  8=)  8=)  8= BB
 

----- Original Message -----
From: bldg-sim-bounces at lists.onebuilding.org <bldg-sim-bounces at lists.onebuilding.org>
To: bldg-sim at lists.onebuilding.org <bldg-sim at lists.onebuilding.org>
Sent: Fri Jul 24 11:10:56 2009
Subject: [Bldg-sim] Schedules used to estimate Daylight Savings-eQuest

Is there a way I can get the schedule used by eQuest to estimate the
daylight savings?
I assume it may be in one of the software files.


Imran Syed, LEED AP
HMS Engineering
"Where air,water and fire behave"




_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG