[Bldg-sim] eQuest : How to Save Results to xls

[Eric Studer]

Hello Neetu,

We have generated macros that copy portions of the SIM file into a Word
document and other macros that take the Word document and paste it into
Excel.  Once in Excel, other macros format the data so that the results
always fall into specific cells.  The macros are not terribly difficult to
develop but some cleverness is required.  It's a good intern project.

Eric

Ph:   (781) 431-1100 ext 12
Fax:  (781) 431-1109
 
-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Neetu Singh
Sent: Friday, July 31, 2009 10:28 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] eQuest : How to Save Results to xls

Hi All,

I was wondering if anyone can give me some guidance upon saving results in
xls from .sim output file. 
My problem: Is it possible to output meter data to xls format from eQuest.
Also can parts of the .sim file be generated in xls format?
If I were to take the current xls report that eQuest generates, it does not
have meter data say a chilled water meter or so, I wanted to know where is
all this being set up.

I appreciate any help that I can get on this.

Thanks 
Neetu


Neetu Singh, LEED AP
The Green Engineer, LLP
Sustainable Design Consulting
50 Beharrell Street
Concord, MA 01742
t: 978.369.8978
neetu at greenengineer.com
www.greenengineer.com



_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG