[Bldg-sim] Equest and DOE 2 metric
Jeff Haberl
jeffhaberl at tees.tamus.edu
Sun Mar 1 15:58:53 PST 2009
JeFF
DOE-2.1e and GUI programs that use it allow a user to input metric units directly. DOE-2 will then
convert them to IP units, or vice-versa.
Jeff
8=! 8=) :=) 8=) ;=) 8=) 8=( 8=) 8=() 8=) 8=| 8=) :=') 8=)8=?
Jeff S. Haberl, Ph.D.,P.E., FASHRAE..............jhaberl at tamu.edu
Professor............................................................Office Ph: 979-845-6507
Department of Architecture.............................Lab Ph:979-845-6065
Energy Systems Laboratory.............................FAX: 979-862-2457
Texas A&M University.....................................77843-3581
College Station, Texas, USA, 77843..................URL:www.esl.tamu.edu
8=/ 8=) :=) 8=) ;=) 8=) 8=() 8=) :=) 8=) 8=! 8=) 8=? 8=)8=0
________________________________
From: bldg-sim-bounces at lists.onebuilding.org [bldg-sim-bounces at lists.onebuilding.org] On Behalf Of jfamailbox-i3er at yahoo.fr [jfamailbox-i3er at yahoo.fr]
Sent: Sunday, March 01, 2009 6:08 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Equest and DOE 2 metric
Hi All,
I'm working on building simulation with TRNSYS and VE in France where Equest and DOE 2 are not used. I have a question about units usable with those tools, I have quickly tested them and it seems to me them only use imperial metric, does it exact or some of tolls based on DOE could work with SI units ?
Best regards
JeFF
More information about the Bldg-sim
mailing list