[Bldg-sim] District Heat
Gaiko Allison
Allison_Gaiko at aha-engineers.com
Wed May 6 12:38:56 PDT 2009
Hi Paul,
It is my understanding that LEED definitely wants you to use the actual fuel (coal) and rate for both the proposed case and the baseline case for the Step 2 model.
I don't know what you should use for efficiency in the baseline case, though. You are right that table 6.8.1 does not have efficiencies listed for coal. Are there any local codes or other mechanical codes that list a minimum efficiency for a coal boiler? Otherwise I would send in a CIR. I searched through the existing ones quickly and did not see any questions on coal fuel. It seems strange though, someone must have modeled a coal fueled building.
Good luck. The district ones are tough. I just finished one and am dreading the LEED review comments!
Allison Gaiko, PE, LEED AP
HVAC Engineer
A|H|A Consulting Engineers
Boston * Atlanta * Washington, DC
10 Maguire Rd, Suite 121, Lexington MA, 02421
781- 372-3000(p) : 781-372-3100(f)
http://www.aha-engineers.com
Allison_Gaiko at aha-engineers.com
-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of bldg-sim-request at lists.onebuilding.org
Sent: Wednesday, May 06, 2009 3:01 PM
To: bldg-sim at lists.onebuilding.org
Subject: Bldg-sim Digest, Vol 18, Issue 5
Send Bldg-sim mailing list submissions to
bldg-sim at lists.onebuilding.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
or, via email, send a message with subject or body 'help' to
bldg-sim-request at lists.onebuilding.org
You can reach the person managing the list at
bldg-sim-owner at lists.onebuilding.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Bldg-sim digest..."
More information about the Bldg-sim
mailing list