[Bldg-sim] WSHP Condenser Loop/HX to HW loop

Dana Troy DTroy at glumac.com
Thu May 7 15:08:29 PDT 2009


All,

 

We are working on a project that has half the building running on 2-pipe
fan coils for heating only and the other half of the building on water
source heat pumps, connected to a condenser water loop.

 

There are two seperate loops, the hot water loop, which has 4 boilers,
and the condenser water loop, which has two fluid coolers. The two loops
are connected via a heat exchanger.

 

When the condenser water loop is in need of heat, it draws heat off of
the hot water loop.

 

 

Is there any way to simulate this system in eQUEST? I cannot find a way
to connect a heat exchanger between the condenser water loop and the hot
water loop.

 

Thanks,

Dana


Dana Troy
Energy Analyst
LEED(r) Accredited Professional

  <http://www.glumac.com/> 

________________________________

320 SW Washington, Suite 200
Portland, OR 97204-2640
T.  503.227.5280  F. 503.274.7674

Thinking. Inside the building.
www.glumac.com <http://www.glumac.com/>  
 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090507/9807a0fd/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 50453 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090507/9807a0fd/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1425 bytes
Desc: image002.gif
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090507/9807a0fd/attachment-0001.gif>


More information about the Bldg-sim mailing list