[Bldg-sim] COP of PSZ-HP and PVAV system for baseline- Appendix GASHRAE 90.1-2004

[ashraf khan]

Hello Sambhav,

For System 4 PSZ -HP and System 6 minimum efficiency is taken from TABLE
6.8.1A of ASHRAE 90.1-2004.

It will be appreciated if any corrections.

Thanks & Regards,
Ashraf

-----Original Message-----
From: sambhav tiwari [mailto:tiwari.sambhav at gmail.com] 
Sent: Saturday, May 30, 2009 5:45 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] COP of PSZ-HP and PVAV system for baseline- Appendix
GASHRAE 90.1-2004

Hello All,

In continuation my earlier query,
I could not also find the appropriate table for COP of system 6-
Packaged VAV of Table G3.1.1A of  Appendix G of ASHRAE 90.1-2004.
Sorry for my innocence regarding these issues but it would be really
great if any one can guide me for selecting the appropriate COP for
both the PSZ-HP (please refer to my query below) and PVAV w/PFP boxes
systems of the system mapping table in Appendix G of ASHRAE 90.1-2004.


Thanks & Regards,

Sambhav Tiwari.


On Thu, May 28, 2009 at 6:48 PM, sambhav tiwari
<tiwari.sambhav at gmail.com> wrote:
> Hello,
>
> I am simulating a non residential building of two floors with a total
> conditioned floor area less than 75000 sq ft. The building maps with
> System 4 PSZ-HP ,of table G3.1.1A Appendix G of  ASHRAE 90.1-2004.
> The System Type is specified as Packaged rooftop heat pump in table
> G3.1.1B, but I could not find the appropriate table which provides me
> the COP of a system with this name.
> Please guide me to know the correct table of ASHRAE 90.1-2004 which
> gives the COP of the above mentioned system.
>
> Thanks & Regards,
>
> Sambhav Tiwari.
>