[Bldg-sim] Ground Source Water-to-Water HP in eQuest

[Garcia, Robert]

This topic appears to be a gray area within eQUEST.  Has anyone been able to successfully model a Ground Source Water-to-Water HP connected to a closed loop Geothermal Well Field?

The WWHP is to serve a radiant floor.  In addition to the WWHP, the design also has multiple Water-to-Air Heat Pumps connected to the same well field.  Issues rise when trying to figure out how to model the effect of the WWHP on the Well Loop.

In the past I have used the Loop-to-Loop Chiller to model a WWHP, but the chiller requires a connection to a Lake-Well type loop.

Thanks in advance.

Robert Garcia |AKF|






This e-mail may contain information that is confidential, privileged or otherwise protected from disclosure. If you are not an intended recipient of this e-mail, do not duplicate or redistribute it by any means. Please delete it and any attachments and notify the sender that you have received it in error. Unintended recipients are prohibited from taking action on the basis of information in this e-mail. E-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be intercepted, deleted or interfered without the knowledge of the sender or the intended recipient. If you are not comfortable with the risks associated with e-mail messages, you may decide not to use e-mail to communicate with AKF.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20091103/a707ad38/attachment.htm>