[Bldg-sim] eQuest/DOE2 instantaneous loads

Jeff Haberl jhaberl at tamu.edu
Fri Oct 2 11:42:53 PDT 2009


"SYSTEMS" outputs will be labeled SV or SS.

"LOADS" outputs will be labeled LV or LS, in the upper left corner of the page.

"PLANT" outputs will be labeled PV or PS.

Jeff


8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  8=()  8=)  8=|  8=)  :=')  8=)8=?

Jeff S. Haberl, Ph.D.,P.E., FASHRAE..............jhaberl at tamu.edu

Professor............................................................Office Ph: 979-845-6507

Department of Architecture.............................Lab Ph:979-845-6065

Energy Systems Laboratory.............................FAX: 979-862-2457

Texas A&M University.....................................77843-3581

College Station, Texas, USA, 77843..................URL:www.esl.tamu.edu

8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=)  :=)  8=)  8=!  8=)  8=? 8=)8=0
________________________________________
From: bldg-sim-bounces at lists.onebuilding.org [bldg-sim-bounces at lists.onebuilding.org] On Behalf Of James Lo [ljameslo at gmail.com]
Sent: Friday, October 02, 2009 1:35 PM
To: Joe Huang
Cc: bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] eQuest/DOE2 instantaneous loads

Joe,

Since we are only novice users here and only using the eQuest as our
interface, I am not familiar with the DOE2 output file well enough to
isolate the SYSTEM loads. (any pointers on the file definition will be great).

That said, from what we can tell, the system loads (making sure I am
not misunderstand you here), such as total cooling coil output, does
reflect the changes we make. That said, since I am trying to separate
them out into gains from walls/window, etc, I was looking into the loads side.

I assume there must be some outputs from DOE2 file which eQuest is
reading from which describe what I am looking for.

Any additional help will be awesome.

thanks everyone

- James

At 12:40 PM 10/2/2009, Joe Huang wrote:
>James,
>
>There are two sets of loads in DOE-2, in both the LOADS and SYSTEMS
>routines. Make sure you're looking at the SYSTEMS loads, not the LOADS
>loads.
>
>Joe Huang
>White Box Technologies, Inc.
>346 Rheem Blvd. Suite 108D
>Moraga CA 94556
>YJHuang at whiteboxtechnologies.com

_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG


More information about the Bldg-sim mailing list