[Bldg-sim] eQuest/DOE2 instantaneous loads

[Nikola Kravik]

James,

Here is a DOE-list you will need-very useful.

Thanks,
Nikola

-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of James Lo
Sent: Friday, October 02, 2009 11:35 AM
To: Joe Huang
Cc: bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] eQuest/DOE2 instantaneous loads

Joe,

Since we are only novice users here and only using the eQuest as our 
interface, I am not familiar with the DOE2 output file well enough to 
isolate the SYSTEM loads. (any pointers on the file definition will be great).

That said, from what we can tell, the system loads (making sure I am 
not misunderstand you here), such as total cooling coil output, does 
reflect the changes we make. That said, since I am trying to separate 
them out into gains from walls/window, etc, I was looking into the loads side.

I assume there must be some outputs from DOE2 file which eQuest is 
reading from which describe what I am looking for.

Any additional help will be awesome.

thanks everyone

- James

At 12:40 PM 10/2/2009, Joe Huang wrote:
>James,
>
>There are two sets of loads in DOE-2, in both the LOADS and SYSTEMS 
>routines. Make sure you're looking at the SYSTEMS loads, not the LOADS
>loads.
>
>Joe Huang
>White Box Technologies, Inc.
>346 Rheem Blvd. Suite 108D
>Moraga CA 94556
>YJHuang at whiteboxtechnologies.com

_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DOE2RPRT.zip
Type: application/x-zip-compressed
Size: 85003 bytes
Desc: DOE2RPRT.zip
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20091002/40045661/attachment-0002.bin>